....if it ain't broke.....
From: Bob Spidell
Sent: Sunday, December 24, 2017 7:22 AM
To: healeys
Subject: [Healeys] Replace seal in speedo adapter
Merry Christmas--or whatever!--Listers.
I have my speedo adapter out on the bench and figured it would be a good time
to replace the O-ring and seal; however, the seal is buried inside the adapter
and it too big to be replaced in the usual fashion. It appears the adapter is
a 2-piece unit, with a smaller part--with the threads for the angle
drive--inside the 'barrel.' It should come apart, but for a small pin that
holds the parts together (see attached photo). Anybody know how to separate
the two; hopefully, so they can be rejoined?
TIA,
Bob
--------------------------------
Bob Spidell - San Jose, CA
--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171224/41bbd89a/attachment.html>
|