OK, regarding the wood block dimensions, here is what we have so far...
2-3/16" x 1-1/16" x ??
Bill Lawrence, BN1 #554
********************
2 -5/16? x 7/8? x 7/16+?
Robert A Westcott
********************
2-3/8? x 7/8? x ??
Perry Small, BN2
Thank you all,
Curt
On Wed, Oct 11, 2017 at 11:19 PM, ROBERT A WESTCOTT <55healey at comcast.net>
wrote:
> Hi Curt & Mike,
>
> Heres an average of each of the 3 dimensions on my ?55 BN1.
>
> L = 2.315 ? 59 mm or about: 2 5/16 ?
>
> W = 0.87 ? 22 mm or about : 7/8 ?
>
> T = 0.42 ? 10.7 mm or about a fat 7/16 ?
>
>
> I would bet that every one si a bit different.
>
> Rob
>
>
>
>
> > On Oct 11, 2017, at 8:29 PM, Michael MacLean <rrengineer.mike at att.net>
> wrote:
> >
> > I would be interested in these dimensions also.
> > Mike MacLean
> >
> > Sent from Yahoo Mail on Android
> >
> > On Wed, Oct 11, 2017 at 5:47 PM, Curtis Arndt
> > <cnaarndt at gmail.com> wrote:
> > Does anyone have handy the dimensions of the wood block between the boot
> prop rod and the inner fender on a BN1/2?
> >
> > <Wooden Block in boot of 5,200 original mile BN1 LACY.jpg>
> >
> > Thanks,
> >
> > Curt
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171012/a3ac9d26/attachment.html>
|