Good for you!! And congratulations!
Steven Kingsbury
BN1 #598
In a message dated 10/14/2017 2:30:12 P.M. Pacific Daylight Time,
michael.oritt at gmail.com writes:
It's back together with a new oil pump and spindle, new pressure relief
valve and spring, new rod bearings, new thrust washers and a new center main
bearing.
I spun it over with the plugs out and oil pressure came up after what
seemed like five minutes but was probably only 15 seconds. With plugs in the
oil pressure is 40 psi at idle and 50 psi at 2K. I'm trusting that all is
good and taking it out for a ride in a few minutes. Fingers still crossed,
but all seems good.
Best--Michael Oritt
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171014/d41d9279/attachment.html>
|