It appears that it could be very useful depending on the application.
John
-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of ROBERT A
WESTCOTT
Sent: Wednesday, October 11, 2017 9:44 AM
To: Tim Davis BN7 <tld6008 at mchsi.com>; Healeys <healeys at autox.team.net>
Subject: [Healeys] aluminum repair
https://www.youtube.com/watch?v=RCrixbXz4rc
When my builder repaired my shrouds there was some of this stuff gumming up
the works.
It made it impossible to do a proper TIG weld and it had to be meticulously
cleaned off or cut away before repairs could be made.
It was a very difficult job.
I would be extremely cautious using this stuff.
If it looks too good to be true, it probably is.
Rob
> On Oct 11, 2017, at 7:38 AM, Tim Davis BN7 <tld6008 at mchsi.com> wrote:
>
> I bought a similar product at a Flea Market several years ago. The seller
was welding /brazing aluminum pop cans. It takes a good bit of practice to
do anything with these and I never was able to use it for my intended shroud
repair. Cleanliness is extremely important.
>
_______________________________________________
$12.75
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/jmsdarch at sbcglobal.net
|