It is easy to remove the base of the bulb and change over the wires.
Kees Oudesluijs
Op 20-9-2017 om 18:58 schreef Bob Spidell:
> I've got LED backlights in my instruments--except for the
> charge/cutoff indicator*--and would like to put them in my
> running/nav/brake lights.? The correct incandescent bulb is an 1157,
> and I've found lots of LED 1157s on the 'net, but they're all neg.
> ground and my cars are both pos. ground (and I'm not interested in
> changing to neg. ground).? Anyone found pos. ground 1157 red bulbs
> anywhere? I'm aware you need to increase the load with resistors, or
> change to a solid state flasher.
>
> TIA,
>
> Bob
>
> * anyone know why you shouldn't use an LED here?? I ran one for a
> while and noticed no issues, but Moss and others are adamant you
> shouldn't do it
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation? $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl
>
|