The blanking sleeve has a small lip that sits in the same recess as the
thermostat. ?Not sure both the blanking sleeve lip and a thermostat together
will fit and seal the cover correctly.Mike MacLean
Sent from Yahoo Mail on Android
On Mon, Sep 4, 2017 at 7:07 AM, Bob Haskell<rchaskell at earthlink.net>
wrote: Moss sells a thermostat bypass blanking sleeve.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=69821
I wonder if you could combine this with a "standard" thermostat to
approach the original with the sleeve?
Cheers,
Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
On 09/04/2017 07:20 AM, Per Schoerner wrote:
> Hi
> Why not block the bypass channel once and for all, maybe combined with a
> little hole in the termostat lid to allow some circulation.
> I have done this with a piece from a little cat food can. It works very well.
> An other way to do it would be to make a new water pump gasket without the
> hole for the bypass.
>
> Per
>
> Skickat fr?n min iPhone
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation? $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell
> at earthlink.net
>
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170904/c2531d32/attachment.html>
|