Maybe I just got lucky, but I had to set the adjustment on the throttle switch
recently when the overdrive began disengaging as soon as the dash switch was
turned off. Being out of beer at the time, I used a test light connected to
the throttle switch and inserted a 3/16" (5 mm) drill bit between the throttle
stop and lever (as directed by the workshop manual), then adjusted the switch
until the light just went out. That worked perfectly the first time. I used
bad language anyway, just for fun....winking0001.gif
Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Earl Kagna
Sent: Monday, September 04, 2017 1:55 AM
To: Roland Wilhelmy; Healey List
Subject: Re: [Healeys] Overdrive wiring question
Setting the throttle switch correctly is pretty tricky on a Healey ? requires a
lot of beer and bad language.
Earl Kagna
Victoria, B.C.
BJ8, BT7 tri-carb
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170904/659d4026/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 696 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170904/659d4026/attachment.gif>
|
