healeys
[Top] [All Lists]

[Healeys] FW: Wiper Problems BJ7

Subject: [Healeys] FW: Wiper Problems BJ7
From: djg at gavinassociates.com (Dennis Gavin)
Date: Mon, 28 Aug 2017 23:02:53 +0000
References: <BN6PR19MB1074576EFA9767185C501C2FAC9E0@BN6PR19MB1074.namprd19.prod.outlook.com>

Dennis Gavin
Gavin Associates Inc
Office: (508)-381-1090
Fax: (508)-381-1095


From: Dennis Gavin
Sent: Monday, August 28, 2017 6:59 PM
To: '010501d31f55$4d0e9980$e72bcc80$@bighealey.org' 
<010501d31f55$4d0e9980$e72bcc80$@bighealey.org>
Subject: Wiper Problems BJ7

Thanks very much for the responses and suggestions. The round piece with the 
wire going into it on the wiper motor is not loose and leads me to believe that 
may not be the issue. I took the wiper arms off the spindle and operated the 
wiper switch. I found the spindles moved properly and parked as you would 
expect. I then put the wiper arms back on and tried to operate once again. From 
the drivers seat the wipers would sweep across to the right and not have the 
power to return. If I assisted the wiper arms they would return and also park 
it the switch were shut to off. Seems like not enough power to make the return 
sweep? Any suggestions are most welcome and thanks in advance.

djg

Dennis Gavin
Gavin Associates Inc
Office: (508)-381-1090
Fax: (508)-381-1095

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170828/c302d343/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>