Listers
Maybe I missed it but for two ear knock offs why not use the steel knock off
wrench that has been available for years. If you lean on the 20 something inch
long lever, just say 100 pounds, you will apply a significant torque to the
knock off. Wacking the ear of the knock off with a 2 pound hammer, lever length
4 inches, should be significantly less toque.? Professor Takahashi would be
appalled that I could not summon up the correct equations to produce the actual
torques applied but, hey, I?m old?..
Aloha
Perry
Sent from Mail for Windows 10
David wrote:
??????????????? We have been using a dead blow shot hammer for 20 plus years
and never damaged a knock off. ?We go thru one about every 5 years or so.?
John wrote:
What do people think about a 32 once rubber mallet versus a 45 once
polyurethane dead blow hammer for removing knockoffs?
?
Sent from Mail for Windows 10
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170813/3b1b710d/attachment.html>
|