--===============1460644010641663126==
boundary="----=_Part_5050_324641840.1472474638461"
------=_Part_5050_324641840.1472474638461
Content-Transfer-Encoding: quoted-printable
Hi Richard,
I can confirm Jean's observation on that plastic covering on the top frame =
legs. I think it may have been there to minimize rattling.=20
Michael S=20
BN1 #174
On Mon, Aug 29, 2016 at 1:34 AM -0400, "Jean Caron" <vintage_roadster_resto=
ration@hotmail.com> wrote:
Richard,
I have only seen a couple of frames for the BN6, mine and one other that I =
restored as well and both had a thin plastic/rubber, grey in colour on the =
lower 3" of the legs. I am not sure if it was there from new but it appeare=
d that way to me. What I did
to mine, since I could not find a grey piece like that, I used some shrink=
ing tube cut to the same length and shrunk over the lower portion of the le=
gs.
Jean
From: richard mayor <boyracer466@gmail.com>
Sent: August 29, 2016 1:12 AM
To: Jean Caron
Cc: Richard Collins; Ahealey help
Subject: Re: [Healeys] top frames
=C2=A0
Question regarding the legs of the top bows going into the sockets in the c=
hassis.=C2=A0 The leg=C2=A0 diameter is much smaller that the socket.=C2=A0=
Is there supposed to be some kind of plastic bushing in there?=C2=A0
On Sat, Aug 27, 2016 at 7:22 AM, Jean Caron=20
<vintage_roadster_restoration@hotmail.com> wrote:
Richard,
Here are a few photos of what an original one looks like, not sure if the o=
nes from Moss are the same. One thing to remember as well is that the legs =
that go into the chassis part of the car just behind the doors must also be=
adjusted, there is a bolt with
nuts that must be raised or lowered so that your top stays taut and does n=
ot fold when driving.
Jean
From: Healeys <healeys-bounces@autox.team.net> on behalf of Richard Collins=
<gonnagitcha90@hotmail.com>
Sent: August 26, 2016 5:46 PM
To: i erbs; Ahealey help
Subject: Re: [Healeys] top frames
=C2=A0
Can someone tell me or send me a photo of their tie down locks going from t=
he soft top frame of a BN7 to the windshield. I bought the apparently prope=
r pair from Moss awhile ago and even after shortening the J hook it is stil=
l far too long to hold the soft
top to the window frame. They may be correct for some soft top frames=C2=
=A0and definite fit on my=C2=A0top frame.=C2=A0I am fairly certain my frame=
is correct but not so certain re the window frame. so, I am wondering of t=
here are different clasps for different 2 seaters...
Regards,
Richard C
BN7 #440
=C2=A0=20
From: Healeys <healeys-bounces@autox.team.net> on behalf of i erbs <eyera30=
00@gmail.com>
Sent: Wednesday, December 30, 2015 7:22 PM
To: Ahealey help
Subject: [Healeys] top frames
=C2=A0
Are theses frames interchangeable?
MY car had the frame with the bent legs, but I just got one with straight l=
egs. I can't locate my bent leg frame. So, can I use the straight one? I am=
fitting a new, but already complete top I bought.
Thanks, Happy New Years to all.
--=20
Ira Erbs
Portland,OR
1959 BN4 100-6
with BT7 engine and disk brakes.
This email has been sent from a virus-free computer protected by Avast.=20
www.avast.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
------=_Part_5050_324641840.1472474638461
Content-Transfer-Encoding: 7bit
<html><head></head><body><p dir="auto">Hi Richard,<br>
I can confirm Jean's observation on that plastic covering on the top frame
legs. I think it may have been there to minimize rattling. <br>
Michael S <br>
BN1 #174<br></p>
<br><br><br>
<div class="gmail_quote">On Mon, Aug 29, 2016 at 1:34 AM -0400, "Jean Caron"
<span dir="ltr"><<a href="mailto:vintage_roadster_restoration@hotmail.com"
target="_blank">vintage_roadster_restoration@hotmail.com</a>></span>
wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc
solid;padding-left:1ex">
<div dir="3D"ltr"">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P
{margin-top:0;margin-bottom:0;} --></style>
<div id="divtagdefaultwrapper"
style="font-size:12pt;color:#000000;background-color:#FFFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;">
<p>Richard,</p>
<p>I have only seen a couple of frames for the BN6, mine and one other that I
restored as well and both had a thin plastic/rubber, grey in colour on the
lower 3" of the legs. I am not sure if it was there from new but it appeared
that way to me. What I did
to mine, since I could not find a grey piece like that, I used some shrinking
tube cut to the same length and shrunk over the lower portion of the legs.</p>
<p><br>
</p>
<p>Jean<br>
</p>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri,
sans-serif" color="#000000"><b>From:</b> richard mayor
<boyracer466@gmail.com><br>
<b>Sent:</b> August 29, 2016 1:12 AM<br>
<b>To:</b> Jean Caron<br>
<b>Cc:</b> Richard Collins; Ahealey help<br>
<b>Subject:</b> Re: [Healeys] top frames</font>
<div> </div>
</div>
<div>
<div dir="ltr">Question regarding the legs of the top bows going into the
sockets in the chassis. The leg diameter is much smaller that the
socket. Is there supposed to be some kind of plastic bushing in
there?
<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sat, Aug 27, 2016 at 7:22 AM, Jean Caron <span
dir="ltr">
<<a href="mailto:vintage_roadster_restoration@hotmail.com"
target="_blank">vintage_roadster_restoration@hotmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex; border-left:1px #ccc
solid; padding-left:1ex">
<div dir="ltr">
<div style="font-size:12pt; color:#000000; background-color:#ffffff;
font-family:Calibri,Arial,Helvetica,sans-serif">
<p>Richard,</p>
<p>Here are a few photos of what an original one looks like, not sure if the
ones from Moss are the same. One thing to remember as well is that the legs
that go into the chassis part of the car just behind the doors must also be
adjusted, there is a bolt with
nuts that must be raised or lowered so that your top stays taut and does not
fold when driving.
<br>
</p>
<p><br>
</p>
<p>Jean<br>
</p>
<br>
<br>
<div style="color:rgb(0,0,0)">
<hr style="display:inline-block; width:98%">
<div dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif"
color="#000000"><b>From:</b> Healeys <<a
href="mailto:healeys-bounces@autox.team.net"
target="_blank">healeys-bounces@autox.team.<wbr>net</a>> on behalf of
Richard Collins <<a href="mailto:gonnagitcha90@hotmail.com"
target="_blank">gonnagitcha90@hotmail.com</a>><br>
<b>Sent:</b> August 26, 2016 5:46 PM<br>
<b>To:</b> i erbs; Ahealey help<br>
<b>Subject:</b> Re: [Healeys] top frames</font>
<div> </div>
</div>
<div>
<div style="font-size:12pt; color:#000000; background-color:#ffffff;
font-family:Calibri,Arial,Helvetica,sans-serif">
<p>Can someone tell me or send me a photo of their tie down locks going from
the soft top frame of a BN7 to the windshield. I bought the apparently proper
pair from Moss awhile ago and even after shortening the J hook it is still far
too long to hold the soft
top to the window frame. They may be correct for some soft top frames and
definite fit on my top frame. I am fairly certain my frame is correct
but not so certain re the window frame. so, I am wondering of there are
different clasps for different 2 seaters...<br>
</p>
<p><br>
</p>
<div>Regards,<br>
Richard C</div>
<div>BN7 #440<br>
</div>
<br>
<br>
<div style="color:rgb(0,0,0)">
<hr style="display:inline-block; width:98%">
<div dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif"
color="#000000"><b>From:</b> Healeys <<a
href="mailto:healeys-bounces@autox.team.net"
target="_blank">healeys-bounces@autox.team.<wbr>net</a>> on behalf of i erbs
<<a href="mailto:eyera3000@gmail.com"
target="_blank">eyera3000@gmail.com</a>><br>
<b>Sent:</b> Wednesday, December 30, 2015 7:22 PM<br>
<b>To:</b> Ahealey help<br>
<b>Subject:</b> [Healeys] top frames</font>
<div> </div>
</div>
<div>
<div dir="ltr">Are theses frames interchangeable?
<div>MY car had the frame with the bent legs, but I just got one with straight
legs. I can't locate my bent leg frame. So, can I use the straight one? I am
fitting a new, but already complete top I bought.</div>
<div>Thanks, Happy New Years to all.<span class="HOEnZb"><font
color="#888888"><br clear="all">
<div><br>
</div>
-- <br>
<div>
<div dir="ltr">
<div>
<div dir="ltr">Ira Erbs
<div>Portland,OR</div>
<div>1959 BN4 100-6</div>
<div>with BT7 engine and disk brakes.</div>
</div>
</div>
</div>
</div>
<div>
<table style="border-top:1px solid #aaabb6; margin-top:10px">
<tbody>
<tr>
<td style="width:105px; padding-top:15px"><a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail"
target="_blank"><img style="width: 90px; min-height: 33px; -moz-user-select:
none;" src="https://ipmcdn.avast.com/images/logo-avast-v1.png"></a>
</td>
<td style="width:470px; padding-top:20px; color:#41424e; font-size:13px;
font-family:Arial,Helvetica,sans-serif; line-height:18px">
This email has been sent from a virus-free computer protected by Avast. <br>
<a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail"
target="_blank" style="color:#4453ea">www.avast.com</a>
</td>
</tr>
</tbody>
</table>
<a
href="#m_3733198358852342007_151f40dfcecb6e25_DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2"
width="1" height="1"></a></div>
</font></span></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br>
______________________________<wbr>_________________<br>
Archive: <a href="http://www.team.net/archive" rel="noreferrer"
target="_blank">http://www.team.net/archive</a><br>
Forums: <a href="http://www.team.net/forums" rel="noreferrer"
target="_blank">http://www.team.net/forums</a><br>
<br>
<a href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer"
target="_blank">http://autox.team.net/mailman/<wbr>listinfo/healeys</a><br>
<br>
http://autox.team.net/mailman/<wbr>options/healeys/boyracer466@<wbr>gmail.com</a><br>
<br>
<br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</body></html>
------=_Part_5050_324641840.1472474638461--
--===============1460644010641663126==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============1460644010641663126==--
|