Hi
When I replaced the rotors and brake pads on my car some time ago they
were really noisy. The rotors I put on are EBC and they are "dimpled",
e.g. there are some dimples and "ditches" in them. The pads I use are
EBC "Green stuff" and they had a "braking in" surface on them, once that
surface was worn out the noise is gone and the it brakes like a dream.
Per
healeymanjim skrev den 2015-05-07 04:47:
> took the barn find for a long enough run yesterday to heat up the brakes and
> they began to really squeal. have new pads, the softest they had, and they
> had a small sticky pad on the back of the metal so I made the assumption that
> they were the shims. after I pulled the pads and put on that brake
> anti-squeal and did another run I swear it was louder. do I need the little
> metal shims like on the bj8. they have only a few miles on them, so the pads
> may have to wear in, but how long should it take. since the rotors sat for
> 25 years, could it be the problem? TIA for any help.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/per@schoerner.se
>
>
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|