G'day
About 12 months back I was having the same sort of fun so I made up a
similar tool and despite being time consuming I did manage to get them out.
Hoo Roo
Patrick Quinn
Blue Mountains, Australia
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of John Sims
Sent: Monday, 20 October 2014 5:04 AM
Cc: 'healeys'
Subject: Re: [Healeys] Remove bolts lower A arm
Look here:
http://www.pbase.com/stevegerow/image/142125264
John Sims, BN6
Aberdeen, NJ
www.healey6.com
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of John
Spaur
Sent: Sunday, October 19, 2014 11:58 AM
To: 'Bob Spidell'; 'Chris Scholz'
Cc: 'healeys'
Subject: Re: [Healeys] Remove bolts lower A arm
Make a fulcrum pin extractor like the one Bob is referring too and as shown
in this sketch that was provided by another lister a while back. Sorry, but
I forgot the person's name.
John
'62 BT7
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|