Awesome - thanks!
Since the factory manual is mute on these things - what does it indicate for
float on the input and mainshafts? Or for that matter any other critical
clearances.
Jonas Payne
PBR Consulting Services, LLC
702.882.6711
From: healeyguy@aol.com [mailto:healeyguy@aol.com]
Sent: Tuesday, November 19, 2013 12:14 PM
To: healeys@autox.team.net
Cc: jpaynepbr@cox.net; healeybruce@roadrunner.com
Subject: Re: [Healeys] Sideshift Transmission Layshaft end float
The Hayne's manual shows 0.021 inch end float for the layshaft.
Aloha
Perry
-----Original Message-----
I'm rebuilding sideshift 4 speed and can't find the tolerance for end float
on the layshaft in the manual - anybody know what it should be?
Jonas Payne
PBR Consulting Services, LLC
702.882.6711
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|