Well some BN4 have a couple of them where the top frame folds down, then one
in the trunk for the prop rod and one for the bonnet rod. Then you have the
BJ7 where two are located at the back of the rear backrest, one in the trunk
and one for the bonnet as well. Both of these have four but I don't know which
model has three.
Jean
> Date: Thu, 25 Jul 2013 23:52:58 +0200
> From: per@schoerner.se
> To: healeys@autox.team.net
> Subject: Re: [Healeys] Austin-Healey Trivia
>
> OK, maybe this is too easy, but here goes-
> The bonnet prop rod is kept in place by a rubber thingie when the bonnet
> is closed. One model of Austin-Healeys have three of those rubber
> things. Which model and where are those rubber things located?
>
> Per
>
> john spaur skrev 2013-07-25 21:25:
> > First one to get it right!
> >
> > It is called a check-strap in the parts manual.
> >
> > Now can you come up with a question?
> >
> > John Spaur
> > San Jose, California
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/vintage_roadster_restoration@ho
tmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|