healeys
[Top] [All Lists]

Re: [Healeys] Goodridge Brake Lines - Warning

To: healeys@autox.team.net
Subject: Re: [Healeys] Goodridge Brake Lines - Warning
From: john spaur <jmsdarch@sbcglobal.net> ville.ca.mail.comcast.net>
Date: Wed, 26 Jun 2013 16:30:50 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <6.2.3.4.2.20130626143541.02082238@pop.att.yahoo.com> <124798631.561804.1372287338030.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net>
Bob - I have stainless steel main supply lines. Copper crush washers 
are recommended to prevent the harder stainless steel from galling 
the softer steel fittings. BTW, the treads don't seal the line they 
hold the flare against the seat to seal the line.

John

At 10:55 PM 6/26/2013 +0000, you wrote:
>Am I the only one thinking you shouldn't need copper crush washers 
>on brake lines (seems to me the flares should do the job)? If you're 
>relying on the threads and crush washers to seal that don't seem right.
>
>bob
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>