Bob
Sounds like the starter or button is at fault and pulling too much current not
allowing any to the coil, when you release the residual current provides power
for coil to fire up. Could also be a bad connection in the above cct.
> From: autofarm@xplornet.ca
> To: healeys@autox.team.net
> Date: Fri, 14 Jun 2013 12:35:44 -0400
> Subject: [Healeys] PROBLEM
>
> OH wise ones,we have a 100 with an aluminum head, good compression,
lots
> of spark, and fuel pressure is 3.5psi. float levels are where they should
be.
> It will start cold. It will not start very well hot. But the part that
has
> us scratching is this, when the start button is pushed it just cranks over
and
> over, as soon as the button is released it fires and starts. Any ideas? We
are
> running out of things to check.
> Cheers.......Bob
> Check out our web site www.autofarm.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ampole@hotmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|