healeys
[Top] [All Lists]

Re: [Healeys] HD8

To: "'Healey List'" <healeys@autox.team.net>
Subject: Re: [Healeys] HD8
From: "Randy Dickson" <rdickson@midwestarchaeology.com>
Date: Wed, 5 Jun 2013 11:40:42 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <51af46ae.028f3c0a.2a57.ffffe5ba@mx.google.com> <1978480178.753234.1370446442499.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net> <CA+QDXmATLaNjN2ZSOrGYnHiQMmc5jn8C-CuoNnvBEms5K0vUXQ@mail.gmail.com> <BAY173-DS19CA66403530392F680498C69F0@phx.gbl>
Thread-index: AQI1hcXWK9MEizLs9FTXw2xqiMrxqgGJpvi5Ae2aQMkBtMPs95gvqWEw
I bought a couple HD8 carbs on Ebay years back, $225 for the pair.  Not a
bad deal.  The issue is as other have stated, the float bowls are parallel
with the carbs and the ones for the Healey need to be canted slightly.  The
carbs I bought were from a Jag most likely.  I found two Healey float bowls
that are correct.  If I'm not mistaken, I should be able to put them on my
BJ7 once I get a 2" manifold.  Right now I have three HS6 carbs on bored out
to 1 3/4 manifolds which work......sometimes.  I guess that most use HD6
carbs for this application.

Randy Dickson
63 BJ7
60 BT7
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Jonas Payne
Sent: Wednesday, June 05, 2013 10:58 AM
To: 'Austin Healey'
Cc: 'Healey List'
Subject: Re: [Healeys] HD8

Gergo,

My XK 150 has 2 HD6 Carbs (1 3/4"), although admittedly it's way
undercarbed.   It's a 3.8L with some hopped up cams.  

 Are you upgrading to HD8's  or do you have a triple HD8 setup currently?

I've been toying with the idea of upgrading to HD8's.

Jonas Payne
PBR Consulting
702-882-6711
_______________________________________________
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>