Bob,
Are you using the Moss blanking sleeve for this?
I bought one of their fail-open t-stats (it's a Motorad) and was wondering
if I can just insert the blanking sleeve and put the t-stat in on top of it
- not sure what I'd solder to what.
--
Steve Gerow
>>>
Date: Mon, 01 Apr 2013 09:29:46 -0700
From: Bob Spidell <bspidell@comcast.net
<https://mbox.hoster902.com/compose.php?to=bspidell@comcast.net> >
To: healeys@autox.team.net
<https://mbox.hoster902.com/compose.php?to=healeys@autox.team.net>
Subject: Re: [Healeys] BJ8 radiator cap issue
<https://mbox.hoster902.com/compose.php?to=5159B5FA.5070601@comcast.net> >
The 160deg sleeved thermostat I got was a standard Stewart/Robertshaw
thermostat with a sleeve soldered on. I
desoldered the sleeve and soldered it to a 180deg Stewart thermostat.
http://www.stewartcomponents.com/tech_tips/Tech_Tips_3.htm
Bob
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|