[Healeys] Seat back material

["Peter Svilans" <peter.svilans@rogers.com>]

John

Yes, the tape was quite important in that it was attached to the foam, and you
pulled the oversized foam edge over and around the pan wire quite tightly so
that the stretched foam formed a thin smooth padded edge. The tape was glued
to the metal seat back and the thin felt or foam back panel smoothed over the
inevitable tape wrinkles.

Peter
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys