On the bt7 floor pan shouldn't there be a stamped area that the outside
rail bolts to, then the inside rail is determined by bolting the frame
together
On Friday, January 11, 2013, Christine Atkinson wrote:
> Finally getting back into the restoration after a 18month break!
>
> Could really use some help in how to locate the correct places to drill
> holes for the seat rails/slides and also the muffler insulation panel. I
> searched the archives and online and could not find anything!
>
> If you have any advice on measurements from X etc. and also the best order
> to do this. Seat rails first etc.
>
>
>
> If you could also copy your response to
> simon.atkinson@capitollight.com<javascript:;>
>
>
>
> Thanks for the help!!
>
>
>
> Simon
>
>
>
> 1959 BT7 Left Hand Drive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net <javascript:;>
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|