I have noticed the gaskets on the healey vary in thickness from
almost paper thin to medium and then thick; however I am not meaning
as thick as cork in this instance.
I had a somewhat medium thick gasket fail at the rear mounting plate
below the cam oil return. I was going to install a slightly thicker
gasket but now I am thinking a very thin gasket much like the ones at
the rear hub should be used. The Moss catalog does not list the
gasket so I will cut one out.
What thickness of gasket material should I use for between the rear
mounting plate and engine?
Thank you,
John Spaur
San Jose, CA
'62 BT7
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|