I had my frame and chassis dipped and primmed for $1,340 in northern
California in 2009. The results were good. However, you will get some
residual bleeding of the stripper and there are spots were it is hard
to paint, if at all. Aside from inside the frame members you will see
this in the small nooks and cranny's where the sheet metal and metal
members abut each other with very small gaps that are not completely welded.
John Spaur
San Jose, CA
At 11:26 AM 12/16/2012 -0500, Mike Tobin wrote:
>I've got the BT7 chassis stripped of parts and I''m ready to get it
>cleaned. I'd thought I'd get the tools and media blast it myself (always
>looking for an excuse to acquire more tools). However, it looks like a
>case where the stuff good enough to really do the job is more than I want
>to spend for a one-time task.
>What about having it dipped? Can the shrouds be dipped? Metal Strip of
>New England (in Worchester MA) is not too far from me. Anybody have any
>experience with them?
>Cheers,
>Mike Tobin
>Pepperell, Mass
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys@autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|