Fred,
I have attached how I fitted my high level brake light, it is also in
my PDF on John Simms wonderful website.
Best of luck.
Don Hardie
________________________________
From: Fred Wescoe <fredwescoe@gmail.com>
To:
healeys <healeys@autox.team.net>
Sent: Saturday, 22 September 2012 9:50 AM
Subject: [Healeys] Third brake light
Lister's,
I have installed a third
brake light and I need some insight. I have tried
what I think are all of the
wiring combinations at the driver's side, rear
tail light.
I can get the
light to work properly with the brakes but then it will also
blink with the
left turn signal. If I then change the wiring, the third
light will work with
the running lights but not the brake lights. And so
it goes with each
different combination I have tried.
Can anyone with a properly working third
brake light clue me in on how to
wire this?
Thanks as always,
Fred
63 BJ7
_______________________________________________
Archive:
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/healeynut@yahoo.com.au
[demime 1.01d removed an attachment of type application/pdf which had a name of
HIGH LEVEL BRAKE LIGHT SWITCH.pdf]
_______________________________________________
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|