Re: [Healeys] Rear Shroud Rivets

[Stephen Hutchings <s.hutchings@rogers.com>]

Does anyone have a description/photo of the tool that squeezes this 
sort of rivet?
Stephen, BJ8

Michael,

If I am not mistaken David Nock has these.  Any way if you have
rivets 1/4" long you can grind about 1/16" off and they should work.  What you
have is an aluminum aircraft rivet, yes?

Jerry Adams
BN2

From: Michael
Salter <michaelsalter@gmail.com>
To: healeys@autox.team.net
Sent: Friday,
September 14, 2012 9:07 AM
Subject: [Healeys] Rear Shroud Rivets

I've been
trying to find the original flat head aluminum rivets used to
attach the rear
shroud.
I've purchased some that are 1/4" long but I think that is too long
for
this application.
Does anyone have any idea what the original length of
these rivets was?

Thanks,
_______________________________________________
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys