There is someone that sells one made from square tubing with a socket
welded to it. It is boxed shaped so it only rests on four of the nut
flats. It works but is not the best fit. I tried to access the
archives to see if I could find an email from the person that I
bought mine from but the server appears to be down.
Remember that the nuts are left and right handed.
John
At 09:48 PM 3/3/2012 +0100, you wrote:
>Hello,
>
>I am trying to dismantle the rear axle of my BN6. So I need
>some wrench of size 2 3/16" (about 55.5 mm). I think this
>really is the right size of the large nut in the center of
>the break housing. It has to be 8-point.
>
>Can someone help my in finding such a wrench? I already
>searched in online shops for workshop equipment but I did
>only find 12-point wrenches which shouldn't fit.
>
>Perhaps there also is an alternative tool to undo the nut.
>
>Thanks,
>Eberhard
>
>
>--
>Eberhard Pietzsch
>Tuebingen, Germany
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/jmsdarch at sbcglobal.net
|