Pretty sure no Big Healeys came with ballast resistors originally (my BN2 and
BJ8 don't have them). Sounds like your
BJ8, at least, is not stock; the coils need to be different in a ballasted
system.
Bob
On 2/12/2012 9:48 AM, llennep@verizon.net wrote:
> Yes Bob that seems to be the case. Both my BJ8 and BN7 have the spade type
>although I am not sure the BN7 is correct as I had to drill holes in the
>spades to attach the screw type connections on the replacement wiring harness.
> The BJ8 has a resistor.
>
> The coil is neither pos or neg. It does not kn ow what the system is as it
>just puts stores and puts out a charge.
>
> Keith
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|