I would not use red. When properly applied red loctite is stronger than the
metal it is applied to. To disassemble a red loctite joint a torch has to be
used. At about 450F the loctite turns to powder.
Rick
Sent from my iPhone
On Feb 9, 2012, at 22:24, john spaur <jmsdarch@sbcglobal.net> wrote:
> Are people using Loctite on the stud to block threads? If so red or blue?
>
> When the studs were removed from the block they seemed very loose because
the stud would often turn before the locknut.
>
> Thank you,
> John Spaur
> San Jose
> MK II
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richard.ewald@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|