Rich I just placed an order with Bob Y. very helpful guy. www.autofarm.net
While we were talking I was asking him about steps to use to buff and sand
and smooth the front rail on the Healey hardtop becuase mine is dinged up.
He said call Rich C. he uses a guy in Quebec and his stuff comes back looking
like new.
My questions are:
1. name of the company
2. Location
3. Phone #
4. Were you satisfied with the service
5. Approximate cost for an entire frame $$_________________-
6. Did you have the metal all cleaned up?
7. What if I have a corner chip in the aluminum will they weld in new
aluminum?
Thanks
Howard 1961 BT7 3000 Rally replica
akronzips@aol.com
-----Original Message-----
From: Rich Chrysler <richchrysler@quickclic.net>
To: akronzips <akronzips@aol.com>
Sent: Thu, Jan 26, 2012 12:07 am
Subject: RE: Hardtop roof vent
Hi Howard,
Go with Bob Yule at Autofarm. Hebll take good care of you.
Rich
From: akronzips@aol.com [mailto:akronzips@aol.com]
Sent: 2012-01-24 3:23
To: richchrysler@quickclic.net; healeys@autox.team.net
Subject: Hardtop roof vent
Hi Rich
Im curious if you know of any supplier that has a roof vent for a factory BT7
2+2 hardtop?
I'm Howard Morris in Akron,Oh
I'm looking to restore a 1961 Healey BT7 3000 Tri -carb (rally Replica) with a
factory Hardtop.
I'm trying to locate a rear vent for the hardtop.
I have emailed the following sites:
Cape International
AH Spares
Gary Hodson had suggested try Rover of North America they use to carry a vent
like this ?
any other sites?
(Vent for Healey hardtop)?
catalog Part number #_____________
Is it a complete kit? or just a vent?
Cost ?(if known
Let me know
thanks for your time
Howard morris
akronzips@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|