Thank you. I wasn't looking for any more work.
Rich Kahn
> From: richchrysler at quickclic.net
> To: tahoehealey at hotmail.com; healeys at autox.team.net
> Subject: RE: [Healeys] Battery cable flange
> Date: Sun, 27 Nov 2011 13:17:14 -0500
>
> Rich,
>
> The metal sleeved bulkhead grommet assembly screws directly to the painted
> bulkhead, then the cable itself protrudes through a small + cut in the
> Armacord. You should not see the metal of the grommet when all is
assembled.
>
> Rich
>
> -----Original Message-----
> From: healeys-bounces at autox.team.net
[mailto:healeys-bounces at autox.team.net]
> On Behalf Of Richard Kahn
> Sent: 2011-11-27 1:13
> To: healeys at autox.team.net
> Subject: [Healeys] Battery cable flange
>
> While nosing around in the boot, I realized the battery cable going through
> the wall between the battery and the gas filler tube (BJ8) had a metal
> flange.
> On my car, it is between the wall and the Armorcor (not visible from the
> boot). On Ebay Healeys for sale, half had it exposed. The Anderson /Moment
> Restoration book shows it mounted as mine. Any comments on the correct way?
> Rich Kahn
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net
|