This is a very common problem on the non adjustable steering column
on all the Healeys. I have tried several pullers and non have been
able to remove the wheel. What will work is to use a large cresent
adjustable wrench, open it up so that it fits over the steering
column then use a large hammer to knock the wheel off hitting the
side of the crescent wrench NOT the steering wheel.
I have never seen why the wheel will not move but they are always
that way.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Nov 26, 2011, at 11:01 AM, Eberhard Pietzsch wrote:
> Hi,
>
> I have a problem removing the steering wheel of my BN6.
>
> I recently managed to unscrew the large nut of the steering
> wheel. Washer as well as aluminium (or alloy?) ring with nose
> for indicator could be taken off.
>
> Now the steering should be free to be pulled off. But it is
> sticky. I can only move it about 1 cm forwand and backward.
> I have made some fotos of this:
>
> http://www.eberhard-pietzsch.de/healey/t1.jpg
> http://www.eberhard-pietzsch.de/healey/t2.jpg
>
> I can freely move the wheel between these two positions but
> I have no chance to pull it of. There seems to be another
> protection against pulling but I can't find it. Can someone
> of you help me?
>
> Thanks,
> Eberhard
>
> --
> Eberhard Pietzsch
> Tuebingen
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
