healeys
[Top] [All Lists]

Re: [Healeys] non Healey fix help

To: john spaur <jmsdarch@sbcglobal.net>
Subject: Re: [Healeys] non Healey fix help
From: Bob Spidell <bspidell@comcast.net>
Date: Mon, 14 Nov 2011 21:08:57 +0000 (UTC)
I have a roll of this. Good for when the liquid just won't do (runs off too 
fast), but it's not for thread repair. 

Also, very expensive ($20+ for a roll). 


Bob 


-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message -----


Loctite has a product called Quicktape 249. I have not used it but it 
is a medium strength thread locker tape like there blue liquid 
product. I believe it would be good for your application. Check it 
out at the Loctite website. 

John 

At 07:02 PM 11/14/2011 +0000, Bob Spidell wrote: 
>Is it a machine or pipe thread? Either way, I believe there are 
>thread inserts available; I'd go with that (use red threadlocker to 
>both lock and seal the threads on the outside of the insert). No 
>goop, tape, etc. is going to do the job (for long). 
>Bob 
> 
>----- Original Message ----- 
> 
> 
>Howdy, 
>My son and I replaced the radiator in his Aerostar Ford van, The top 
>Automatic tranny line got cross threaded. Has anyone come up with a fix? 
>Ira Erbs 
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>