Dear Ed
I don't have time or parts available to quickly check this but I have in
the back of my mind that the screwed plug that covers the lower end of
the 100 distributor drive on the engine might fit. If you have a parts
list; 8G 500 Engine - plate A2.
Mind you I could be wrong so don't rely on this
Regards
>
>I would like to use the overdrive extension casting from a BN1 on another
>overdrive application. This means that I'd either have to leave the BN1's
>centrifugal switch in place, unused, or find a another way to plug the
>opening.
>
>
>
>Has anyone ever found a plug for this opening? Or, does anyone know the thread
>size of the switch. It appears to have a 1.5mm pitch and around a 32mm
>diameter.
>
>Ed Woods
--
John Harper
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|