Just about to begin the most exciting chapter!!!
BMC forever!
Gergo
2011/8/30 i erbs <eyera3000 at gmail.com>
> After the fine folks at Cape International shipped me the updated bracket,
> gratis, I was able to hook up the carb end of the cable. The next step was
> how to attach the throttle arm end. I fabricated an easier to attach
> bracket
> to attach the throttle arm end of the cable. At this point, not beautiful,
> but it is proof of concept. Not sure about how much throw I have on the
> carb
> shafts, but I hope to know asap. Need to wire up my dash and insulate any
> bare wire ends from things not hooked up yet, hang my exhaust and see if I
> can light her off and not burn up the loom.
> Stay tuned....
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/pajtamuvek at gmail.com
|