Jose -
There are two of these triangular (or more accurately, rhomboid) blocks
which one bolts to the front wall of the boot and the other on the lefthand
side. There should be two captive nuts welded on the axle side of the boot
wall, the block will bolt onto that. If I recall these should be 7/16"
nuts. The one that bolts to the front boot wall will have a small piece of
flat iron, twisted, with a hole, for the tyre hold down bar to fit through.
Alan
On Mon, Aug 8, 2011 at 8:09 PM, Jose Vicente Vargas <jvvmusme at
yahoo.com>wrote:
> Can anyone supply me (off list) a picture of the position of the Spare tire
> wood triangle, that helps keep the spare tire in place ?
>
> I have the piece but i do nt know where to screw it.
>
> Thanks
>
> Jose
>
>
> Sent from my iPad
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
|