Bob, while using the starter relay button to turn the engine for valve
setting, I suddenly lost all electrical power. No starter, no lights, no
horn, no nothing. My problem was a bad connection from the battery ground
cable to the cutoff switch. I removed the cutoff switch and connected the
battery cable directly to ground, and all was well.
Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC USA
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Bob Spidell
Sent: Friday, August 12, 2011 1:09 PM
To: Bob Johnson
Cc: Healeys
Subject: Re: [Healeys] Powerless BJ8
Run a jumper cable from the ground (neg) terminal on the battery to bare
metal somewhere on the chassis.
If things start to work the problem is in the cutoff switch (note: blk/wht
wire on cutoff only prevents spark, won't stop cranking, lights, etc.).
Bob
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|