Hi John,
With advice from a pro, I used a very soft artist paint brush, style
make-up brush with water and a bit of simple green. The paint of the letters
can be very brittle so on a dirty area of the face you'll have to somewhat
work around the letters with a smaller brush. Then use a soft lint free
cloth or paper kitchen towel to dry the face by dipping not wiping.
At the
end I just protected the face with a bit of a good wax. I've seen clear
coated faces but they just looked over-restored with their hideous orange peel
clear coat.
Restoring the gauge was a nice winter project, I went as far as
scanning the numbers of the odometer/tripmeter dial wheels and making vinyl
stickers which worked out great.
Good luck,
Bert
--- On Sat, 7/16/11,
john spaur <jmsdarch at sbcglobal.net> wrote:
> From: john spaur
<jmsdarch at sbcglobal.net>
> Subject: [Healeys] Cleaning gauge faces
> To:
healeys at autox.team.net
> Date: Saturday, July 16, 2011, 7:27 AM
> How are
people cleaning the speedo
> and tack faces? Are they to delicate to clean
except to dust
> off with a very soft brush?
>
> John
> San Jose, CA
>
_______________________________________________
> Healeys at autox.team.net
>
Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bertvanbrande at yahoo.com
|