After dismantling, have determined how wiper actually works, reinstalled and is
now working. Now about that bub clip for the tachb&b&
Jonas Payne
PBR
Cell: (702) 358-5084
From: Bob Spidell [mailto:bspidell@comcast.net]
Sent: Saturday, July 09, 2011 5:13 PM
To: Jonas Payne
Cc: healeys@autox.team.net
Subject: Re: [Healeys] Wiper Switch/Working Tach - BJ8
re: "Another question - Is the wiper a 2 speed wiper?"
Yes. Speeds are off and too slow.
bs
--------------------------------
Bob Spidell - San Jose, CA
________________________________
Have traced my not working tach to a short somewhere in the wiper
system.
Good news is that the tach now works with the wiper disconnected.
I have continuity between the green wire to the wiper and the ground on
the wiper, which leads me to believe that it is shorted out?
Another question - Is the wiper a 2 speed wiper? Are there any special
markings on the wiper switch?
Jonas Payne
PBR
Cell: (702) 358-5084
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|