Jonas -
Pull the white wire from the coil and reconnect, and pull the white
wire to the ignition switch and reconnect. I assume you are driving a
BJ8.
Alan
On 7/5/11, Jonas Payne <JPayne@thorcon.net> wrote:
> My tach isn't working - it works fine in a friends car.
>
> I do have 12 volts between the terminal on the ignition switch and
> ground.
>
> Red ignition light stays on while car is running, apparently is it is
> supposed to turn off when the car is running.
>
>
>
>
> Jonas Payne
> PBR
> Cell: (702) 358-5084
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|