healeys
[Top] [All Lists]

[Healeys] 185/70/15 tyre doesn't fit in the boot.

Subject: [Healeys] 185/70/15 tyre doesn't fit in the boot.
From: healeydoc at sbcglobal.net (David Nock)
Date: Mon, 27 Jun 2011 08:33:01 -0700
References: <752282471.16788.1309045932418.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net>
We move the tire blocks up about 1" to accept the new larger tires.




David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Jun 25, 2011, at 4:52 PM, Bob Spidell wrote:

> I take the stock 'block-and-tackle' out and put the 185/70 spare on  
> 6-inch rim in the boot. Just fits, with a toolbox between it and  
> the battery to keep it from sliding around.
>
> Bob
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
> ----- Original Message -----
> From: "Derek Job" <derek.c.job at gmail.com>
> To: "Forum" <Healeys at autox.team.net>
> Sent: Saturday, June 25, 2011 12:57:50 PM
> Subject: [Healeys] 185/70/15 tyre doesn't fit in the boot.
>
> I guess from the many threads on tyre sizes a lot of you are  
> running around
> with 185/70/15 tyres. I am and I have one as a spare, and it won't  
> fit in
> the boot if you use the standard wood block/wire bar/leather strap  
> set up.
>
> When I got the car the spare was jury rigged with an eye bolt, some
> polyester type ribbon tape and a ratchet to tighten it to the the  
> strut at
> the centre rear of the boot. Not very pretty and I saw this as a nice
> little job to upgrade to standard and bought the missing parts. I  
> fitted the
> block and bar after some difficulty in removing frozen nuts being  
> used to
> keep the eye bolt in place on the rear bulkhead, only to then  
> studpidly
> discover that I couldn't close the boot lid when I put the spare  
> tyre in!
> Idiot,
>
> Just wondering what others do in this position. I don't want to go  
> out and
> buy a narrower wheel and 165 tyre but I do like the look of the  
> leather
> strap and bar set up. I was thinking of just ditching the wooden  
> block and
> attaching the bar directly to the bulkhead or using just a thin  
> piece of
> plywood in between. The couple of inches gained will be enough to  
> allow the
> boot lid to close. Any other ideas?
>
> Derek
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> bspidell at comcast.net
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net

<Prev in Thread] Current Thread [Next in Thread>