Rick -
Honestly the best solution to this problem is to take out your exhaust
header and have it Jet Hot coated with Extreme Sterling to cut down the
temps under the bonnet. The Intake manifold sits right on top of the
exhaust header and the only way to effectively reduce temps in under the
bonnet is by doing this. It's a bit of a job, but if you drive in a hot
climate it is well worth it. It really makes a noticeable difference.
Alan
On Mon, Jun 6, 2011 at 9:38 AM, Rick Huber <hubrick@gmail.com> wrote:
> Thanks for the reply's. I'm thinking with my just rebuilt HD8's (only
> driven 2,000 miles since the restoration), I wouldn't have any wear or heat
> problems with the teflon bushings leaking air in. Since nobody said yes to
> my idea about changing the mixture in the summer heat, I'll go with
> insulating the fuel line.
> Cheers,
> Rick
> 64 BJ8
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|