G'day
Listers would recall the loud and expensive noises coming from the engine of
the BN3/1.
The engine is still in the car, but everything hanging off it has now been
removed. Yesterday my eldest son and I removed the cylinder head. It was a
struggle, but once the overdrive throttle switch was removed it was possible
to lift the head, move it sideways and then away from the engine.
At first glance everything appeared as it should be, but looking more
closely today, a 12mm by 5mm piece from the edge of the crown of the No 2
piston was missing. Small bits of aluminium were embedded in the top of the
piston and minor damage was evident in the combustion chamber. The top
compression ring was intact hence the smooth but noisy running.
Watch this space.
Hoo Roo
Patrick Quinn
Sydney, Australia
On 4/23/11, Patrick and Caroline Quinn <p_cquinn at tpg.com.au> wrote:
> G'day
>
>
>
> Here is something to get your collective minds around.
>
>
>
> Yesterday morning we were 560 kilometres from home in the BN3 having just
> crossed some many kilometres of featureless plains and semi dessert. We
> arrive in a large town looking for fuel and then suddenly an audible
> clanging sound emanates from the engine. We immediately pull over to
> investigate and despite much head scratching nothing significant can be
> found. I disconnect the fan belt and also eliminate a rocker hitting the
> rocker cover.
>
>
>
> Six and a half hours of sitting in the back seats of a tilt tray truck we
> arrive back home.
>
>
>
> Today I removed the rocker cover and all valves are opening correctly,
plus
> the noise is still there. So what do we think the noise is? Oil pressure
is
> still good, so it probably isn't a slipped big end. It is definitely not
> coming from the gearbox.
>
>
>
> Without taking the engine out, my guess is a broken crankshaft. What's
> yours?
>
>
>
> Hoo Roo
>
>
>
> Patrick Quinn
>
> Sydney, Australia
|