Last night I changed the gauge: same results
I removed the spring and relieve valve, no metal debris, cleaned it and
reinstalled it: same results
Tonigth I am going to pump air through the valve relieve hole into the oil
system, after removing the oil filter and gauge: good or bad idea ?
I am considering changing the oil: any logic on that ?
Thanks,
Jose
Sent from my iPad
On May 23, 2011, at 1:18 AM, Oudesluys <coudesluijs at chello.nl> wrote:
> Question is: was the gasket replaced just before the raise in oil
> pressure occurred? If the gasket was not replaced this cannot be the cause.
> From all descriptions and try outs I can only conclude that the
> overflow/pressure valve/spring in the oil pump is stuck
> Kees Oudesluijs
> NL
>
> [demime 1.01d removed an attachment of type text/x-vcard which had a name of
coudesluijs.vcf]
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme at yahoo.com
|