[Healeys] Engine Stand or Cradle

Subject:	[Healeys] Engine Stand or Cradle
From:	bj7healey at gmail.com (Bob Slater)
Date:	Fri, 13 May 2011 17:56:17 -0400
References:	<1057839063.562432.1305126233161.JavaMail.root@sz0058a.westchester.pa.mail.comcast.net>

I solved my problem with the gas tank thread. I soldered a piece of 5/16
copper pipe inside of thread and used gas line hose to pump. Worked great.
  If you go to this web address you can see what I did.

                     https://picasaweb.google.com/lh/myphotos

                         *Bob        1963 BJ7*

<Prev in Thread]	Current Thread	[Next in Thread>
[Healeys] Engine Stand or Cradle, (continued) [Healeys] Engine Stand or Cradle, Mark LaPierre Re: [Healeys] Engine Stand or Cradle, richard mayor [Healeys] Engine Stand or Cradle, richard mayor Re: [Healeys] Engine Stand or Cradle, Alan Seigrist [Healeys] Engine Stand or Cradle, Alan Seigrist Re: [Healeys] Engine Stand or Cradle, John Vrugtman [Healeys] Engine Stand or Cradle, John Vrugtman Re: [Healeys] Engine Stand or Cradle, Chris Dimmock [Healeys] Engine Stand or Cradle, Chris Dimmock Re: [Healeys] Engine Stand or Cradle, Bob Slater [Healeys] Engine Stand or Cradle, Bob Slater <=

Previous by Date:	Re: [Healeys] Engine Stand or Cradle, Bob Slater
Next by Date:	Re: [Healeys] Both Mags ....., J. Scott Morris
Previous by Thread:	Re: [Healeys] Engine Stand or Cradle, Bob Slater
Next by Thread:	[Healeys] Engine Stand or Cradle chester.pa.mail.comcast.net>, john spaur
Indexes:	[Date] [Thread] [Top] [All Lists]