Ralph, we had a customer a few years back who changed the clutch and in the
process he decided to clean the main shaft of the transmission and the pilot
bearing in the back of the crank shaft. As a result of this the shaft seized
in the pilot bearing because the bearing went dry. I understand this is an oil
bushing but they can dry out. If you did this and did not regrease the pilot
bushing and main shaft, the main shaft may have seized.
Happy Healeying, Marty www.jule-enterprises.com
--- On Thu, 5/19/11, Ralph Cap <rjcapo1@yahoo.com> wrote:
From: Ralph Cap <rjcapo1@yahoo.com>
Subject: [Healeys] trans problem
To: Healeys@autox.team.net
Received: Thursday, May 19, 2011, 2:26 PM
just changed the clutch disk and now can't get the car to go in gear at all
what to do
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jule_enterprisesah@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|