Alex -
The quality is good, definitely as good as original, however the
finish is "chrome-ish" when I think it should be zinc, right?
Alan
On Tue, May 3, 2011 at 11:29 AM, Alex Hope <seven3four@hotmail.com> wrote:
> I'd be interested to know of people's experience with reproductin seat
runers.
> Are they all the same ? Are they good quality or rubbish ? Are they good
> value at about $100 per seat ?
>
> I have the capacity to rebuild the existing ones by welding in new studs,
> re-plating and re-assembling with new bearing balls but that's a lot of
work
> and extra time off the road compared to fitting replacements.
>
> Alex Hope
> Australia
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|