i have replaced a bunch of speedo cables for healeys in our club, and that is
the problem most of the time. i always take the speedo out and put it on the
bench, plug a short cutoff piece of cable into the drill motor, insert the
squared end into the speedo, reverse drill direction and run the speedo up to
about 40mph or so. if it is stable the problem is almost always a kinked cable
or bad angle drive. the cables hang down sometimes and get dinged, or is under
a strain around the gearbox. hjim
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|