In fact, I kept a link to Michael's setup for reference (about halfway down the
page):
http://www.britishcarforum.com/bcforum/ubbthreads.php/topics/636273/Re_100M_Cold_Airbox_Filter
The DW adapter had about a 4.5" OD (he sells a special tube). I cut/rewelded
ours down to a 4" dia. so a standard cold
air supply ("crotch cooler") hose would fit. Still, it's tight.
Bob
On 4/20/2011 12:55 PM, Michael Oritt wrote:
> Some years back I ordered the round-hose to square CAB adaptor that DW sells.
> I simply could not get it to clear the
> bent shroud support and wound up having one welded up out of AL. Even still
> it is very difficult to make the
> transition and bend the hose to thread by the rad support. BTW I use a
> conical foam filter stuck into the front of
> the hose just behind the grill--I access it merely by reaching in from the
> left front wheel opening.
>
> Best--Michael Oritt
> ---------------------------------------
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
|