| Subject: | [Healeys] Powder coat steering box - Report |
|---|---|
| From: | jmsdarch at sbcglobal.net (john spaur) |
| Date: | Tue, 29 Mar 2011 16:17:14 -0700 |
I got the steering box back from the powder coater today. The solder did melt but it did not fail or come apart. I can tell because there are a couple of solder drops on the outside of the powder coating at the joint. The powder specification was 400 degrees Fahrenheit for 10 minutes although the temperature can vary up and down a few degrees. John '62 BT7 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Healeys] Powder coat steering box - Report, john spaur |
|---|---|
| Next by Date: | Re: [Healeys] Dynamat/Dynashield?, Mr. Bill |
| Previous by Thread: | [Healeys] Powder coat steering box - Report, john spaur |
| Next by Thread: | [Healeys] Door striker - catch, john spaur |
| Indexes: | [Date] [Thread] [Top] [All Lists] |