healeys
[Top] [All Lists]

[Healeys] Dist. caps again

Subject: [Healeys] Dist. caps again
From: healey.nut at gmail.com (Alan Seigrist)
Date: Sun, 13 Mar 2011 11:53:01 +0800
References: <004001cbe12d$ad81bd50$4001a8c0@markl946cfrd7q>
Definitely stranded... Maybe there are some newer tech wires out there
that might work, but standard carbon core is a bad idea.

On 3/13/11, Mark LaPierre <lapierrem at sbcglobal.net> wrote:
> I picked up an NOS top load, dissy cap that has the black bakelite "screw
> in"
> caps and copper washers for all the plug wire holes.  Has anyone tried to
> use
> the carbon wires with
> this type of cap?   Normally its necessary to spread the individual wires
> over
> the
> copper washer before you screw the bakelite screw caps in.  But its not
> really
> possible
> to spread the carbon wires like that.  Can the carbon wire just be bent in
> one
> direction and screwed down?   Or are the old stranded wires the only way to
> go
> with this cap?
>
> Mark
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>

-- 
Sent from my mobile device

<Prev in Thread] Current Thread [Next in Thread>