In the Electrical section on the Technical page
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Robert Blair
Sent: Thursday, January 27, 2011 2:01 AM
To: healeys@autox.team.net; Steve B. Gerow
Subject: Re: [Healeys] Driving Light Brackets - Yes..BJ8
Steve, I have a design [for the BJ8 - could be adjusted for any 6 cyl] that
does drill thru the splash panel/valence, and uses 2 simple alu machined or
steel bent brackets over and under the panel attached to the bumper irons to
fully stabilize the lamps and avoid valance wobble. Easy to drill and fit.
Looks great. I believe John Simms put my simple 3D dwgs on his web site.
If you cannot find them I can send them with a pic of my lamps [7 inch
Marchals] on the car direct if you wish.
Robert N. Blair Yellow 65BJ8 RNBmail@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|